CONNECTING INSTRUCTIONS CONTINUED
3. Peel back braid.
4. Cut away white section, leaving approx. 3 mm.
3 mm
5. Fit small black section (step 2) over the white.
6. Screw plug over exposed cable.
7. Trim off excess braid. Trim off excess and solder-exposed wire to pin.
8. Bring back collar and screw over plug.
PN: 310667 DN: 48196-1
A division of Standard Communications Pty Ltd.
Head Office: PO Box 96, Winston Hills, NSW 2153, Australia.
New Zealand: PO Box 58-446 Botany, Auckland, 2163, NZ. T:(09) 274 0955.
All other international enquires email: export@gme.net.au
ANTENNA INSTRUCTION LEAFLET
To Previous Page
