TX3100 INSTRUCTION MANUAL PAGE 5
field of vision or interfere with rear view mirrors and sun
visors. It may also result in the DC power lead trailing in the
field of vision.
• Deciding on the location of the unit should also factor where
power leads may need to run to avoid the possibility of them
interfering with or becoming entangled in vehicle controls.
• Covering or restricting access to dash instruments and controls
is not recommended.
The responsibility of deciding the location of where the unit is
mounted rests entirely with the end-user and should be carefully
considered to ensure compliance with any state or federal laws.
FEATURES
•
Microprocessor Controlled Frequency Synthesiser:
Allows user programmable control of scanning, channel
memories and selected feature options.
•
Advanced Signal Management (ASM):
Identifies
interference caused by strong local signals on adjacent
channels and prevents these from opening your squelch.
ASM also minimises distortion on reception by fine tuning the
receiver frequency to match that of the incoming signal.
•
Dynamic Volume Control (DVC):
Automatically
compensates for variations in received audio level resulting in
a constant audio output level to the speaker.
•
Programmable Scan Function: Scans the programmable
UHF CB channels.
•
Individually Programmable DUPLEX function: User
selectable for only those individual channels in your area that
have repeaters, leaving the others free for use as extra
simplex channels.
•
High Contrast Liquid Crystal Display: Fully detailed LCD
provides a visual indication of the selected channel and all
selected functions at a glance. Backlit for viewing at night.
•
Flip Feature: Unit can be mounted with the speaker facing
upwards or downwards and the display ‘flipped over’ using
a simple key-press sequence to allow viewing of the display
from either mounting orientation. Keys use symbols to provide
readability in all installations.
•
Compact Size: Fits into the smallest locations allowing
installations in even the most ‘space challenged’
environments.
•
CTCSS & DCS: A built-in Continuous Tone Coded Squelch
and Digital Coded Squelch System option provides quiet
channel operation.
•
Overvoltage Protection: Special overvoltage detection
circuitry protects the radio and warns of excessive voltage
conditions by flashing the display.
•
Surface Mount Technology: The very latest surface mount
component types, design and assembly techniques and quality
control procedures are used to ensure the highest performance
and reliability.
•
Designed and Engineered in Australia
To Next Page
Loading...
