TX3345 INSTRUCTION MANUAL PAGE 7
Menu
The Menu provides a convenient way to customise your radios
settings.
The following Menu options are available.
MENU
ITEM
FUNCTION AVAILABLE
SETTINGS
SQL Adjust Squelch Level SQL--1 TO SQL--9
CTCSS Set CTCSS or DCS Code CTCOF
CTC01 -> CTC50
DC001 -> DC104
LIGHT Adjust Display Brightness See Display
COLOR Adjust Display Colour See Display
WHITE Adjust Colour Saturation See Display
S-METER/
BATT
Display S-Meter or Battery
Voltage on the LCD
S-MET / BATT
BEEP Adjust Key Beep-Tone
Volume
VOL--0 -> VOL--9
DVC Activate/ Deactivate the
Dynamic Volume Control
DVCOF / DVCON
To use the Menu
Press and hold the
MENU
F
key until the radio beeps. ‘SQL’ will
be displayed indicating the first Menu item (Squelch setting
mode) is selected.
Briefly press the
MENU
F
key to cycle through the Menu items.
Press the
or keys to adjust the selected Menu item.
When finished, press and hold the
MENU
F
key to exit the Menu
or wait until the Menu times out.
To adjust the Squelch sensitivity from the Menu
1. Press and hold the
MENU
F
key for several seconds. The radio
will enter Menu mode and ‘SQL’ will be displayed.
2. Press the
or keys to adjust the Squelch value.
3. When your adjustment is complete, briefly press the
MENU
F
key to return to normal operation.
bACKlighting
The Liquid Crystal Display and keys are backlit for easy viewing
at night. The backlight remains on while the radio is switched
on. The backlighting brightness, colour and saturation are all
fully adjustable for personal preference.
To adjust the Backlighting:
1. Press and hold the
MENU
F
key for several seconds. The radio
will enter Menu mode and ‘SQL’ will be displayed.
2. Press the
MENU
F
key repeatedly until ‘LIGHT’ is displayed.
3. Press the
or keys to adjust the backlight
brightness.
4. Press the
MENU
F
key briefly. ‘COLOR’ is displayed.
5. Press the
or keys to adjust the backlight colour.
The full spectrum of colours is available.
6. Press the
MENU
F
key briefly. ‘WHITE’ is displayed.
7. Press the
or keys to adjust the whiteness or
colour saturation of the selected backlight colour from full
colour to white (no colour).
8. To exit, press and hold the
MENU
F
key or wait for the Menu
to time out.
TIP: For the deepest colour range, reduce the WHITE setting.
Key beePs
The key beeps act as confirmation of your key presses. You can
adjust the volume level of the beeps as follows.
1. Press and hold the
MENU
F
key for several seconds. The radio
will enter Menu mode.
2. Press the
MENU
F
key repeatedly until ‘BEEP’ is displayed.
3. Press the
or keys to adjust the beep volume from
0 (silent) to 9 (loud).
4. To exit, press and hold the
MENU
F
key or wait for the Menu to
time out.
To Next Page
Loading...
