Page 20 1OPVM26EN – April 2018
VM26-J Operating Instructions & Function Tests
Battery Charging
The charger surface can get hot while operating. Contact with the skin or surrounding materials should
be avoided.
To reduce the risk of an electric shock, connect only to a properly grounded single-phase (3 wire) outlet.
Do not use an external charger or booster battery.
Charge the battery in a well-ventilated area.
Use proper AC input voltage for charging as indicated on the machine.
Use only GMG authorized batteries and chargers.
IMPORTANT— Be sure to disconnect the charger from the outlet before attempting to
operate the unit.
The Battery Charger is
located under the cover
at the rear of the turret.
The charger will indicate
the status of the charge
cycle.
Battery
Charger
beneath
cover
13359
To Next Page
Loading...