Go Power GP-ECO-80 User Manual

2
gpelectric.com
GP-ECO-80
1.0 General Information 2
1.1 How Does a Go Power! Solar Charging Kit Work? 3
1.2 Warnings 3
1.3 Required Tools 3
1.4 Parts Checklist 4
1.5 Module Specications 4
2.0 Wiring Modules with MC4 Cables 5
2.1 Installling your 80 watt Eco Kit (GP-ECO-80) 5
3.0 Routing Power Cable through the Fridge Vent 5
3.1 Method 1 – Hole in Side of Vent 5
3.2 Method 2 – Through Screen Grid 5
4.0 Mounting the Solar Module 5
4.1 Using Mounting Feet 5
5.0 Installing The GP-PWM Controller 6
5.1 Mounting The GP-PWM Controller 6
6.0 Connecting to the Battery & Solar Array 6
6.1 Typical Battery Connection 6
7.0 Limited Warranty 7
7.1 Warranty Return Procedure 7
8.0 Diagram: MC4 Power Cables 7
1.0 General Information
Congratulations on purchasing your Go Power! Solar Kit. You have chosen a clean, quiet and sustainable power source. Go Power! Solar
Charging Kits allow you to enjoy the luxuries that electricity provides, without hooking up to shore power, by keeping your batteries charged.
For simple battery maintenance to full-time live-aboard power, Go Power! Solar Kits are available in a variety of sizes and can be installed on
RVs, boats, campers, trailers, fth wheels, motor homes, cottages/cabins, long-haul trucks and industrial applications. This manual is geared
towards RV installation. For other applications, please consult a certied electrician or contact Go Power! Technical Support. Information in
this manual is subject to change, please visit gpelectric.com for the most current version of this manual.
Table of Contents

Go Power GP-ECO-80 Specifications

General

Brand	Go Power
Model	GP-ECO-80
Category	Inverter
Language	English