Go Power GP-ECO-80 User Manual

4
gpelectric.com
GP-ECO-80
PART
01. 50’ MC4 Cable with Male and Female MC4 Connectors
02. #10 x 1” Wood Screws
03. #10 x 1.5” Machine Screws
04. #10 Well Nuts
05. #10 Lock Washers
06. #10 Flat Washers
07. 3/8” Plastic Cable Clamps
08. #8 Screws for Cable Clamps
09. Fuse Holder Inline with 10A Fuse
10. 80 watt Solar Module
11. GP-PWM-10 Controller
1.4 Parts Checklist
GP-ECO-80
1
4
4
4
4
4
4
4
1
1
1
SPECIFICATIONS GP-ECO-80
Cell type Polycrystalline
Rated power (Pm) 80W
Maximum power voltage (Vmp) 17.5V
Maximum power current (Imp) 4.57A
Open circuit voltage (Voc) 21.6V
Short circuit current (Isc) 4.94A
Temperature coe󰀩cient of Voc (volatge) - 0.33% / °C
Temperature coe󰀩cient of Pmax (max power) - 0.45% / °C
Temperature coe󰀩cient of ISC (current) +0.05% / °C
Module e󰀩ciency 15.9%
Maximum system voltage 600VDC
Series fuse rating 7A
Weight 15.4 lb (7 kg)
Dimensions
34.65 x 26.4 x 1.18 in / 880 x 670 x 30 mm
Frame type / material Anodized aluminum
Power tolerance +/- 3%
Power Specications calculated at STC:
• Irradiance: 1000 W/m
2
• Cell Temperature: 77 °F (25 °C)
• Air Mass: 1.5
Specications are subject to change without notice.
1.5 Module Specications
01 03
06 07
08
09
04 0502 10
11
Battery (not included)
30

Go Power GP-ECO-80 Specifications

General

Brand	Go Power
Model	GP-ECO-80
Category	Inverter
Language	English