Battery:
Cell Chemistry Li-ion NMC
Pack Capacity Up to 187Wh (14.4V,up to 13Ah)
Single Cell Equivalent Capacity Up to 52000mAh @ 3.6V
Lifecycles 500 Cycles to 80% capacity
Shelf-life Charge every 3-6 months
Management System MPPT charge controller, low battery protection
Ports:
USB port (output) 5V,up to 2.4A (12W max), regulated
USB-C port (output) 5-12V,up to 3.0A (18W max), regulated
USB-C port (input/output) 5-20V,up to 3.0A (60W max), regulated
6mm port (output,6mm) 12V, up to 10A (120W max)
12V car port(output) 12V, up to 10A (120W max)
120V AC Inverter (output, modified sine wave) 120VAC 60Hz, 1A (120W, 200W surge)
230V AC Inverter (output,modified sine wave ) 230VAC 50Hz, .5A (120W, 200W surge)
Charging Port (input, 8mm, blue, circle) 13-22V, up to 7A (100W max)
General:
Chainable No
Weight 5 lbs(2.27 kg)
Dimensions 7.9 x 5.1 x 5.1 in(20.0 x 13.0 x 13.0cm)
Operating usage temp. 32-104 F (0-40 C)
Certs
Warranty 12 months
Technical Specifications
Having your Goal Zero Yeti connected to a power source, like a solar panel or wall plug, between adventures
or while in storage keeps its battery healthy and topped off. This prolongs battery life and will ensure your
Goal Zero Yeti is charged and ready to go all day, every day.
If you can’t keep your Goal Zero Yeti plugged into a power source during storage, fully-charge your
Goal Zero Yeti every 3 months and store it in a cool, dry place. Failure to maintain your Goal Zero
Yeti by following these steps can result in battery damage which will void the product warranty.
Storage and Downtime Maintenance
9
8
To Next Page
Loading...
Need help?
General
