570mm
153mm
135mm
Page 1
//www.goblin-helicopter.com
http:
Please read this user manual carefully, it contains instructions for the correct assembly of the model.
Please refer to the web site www.goblin-helicopter.com for updates and other important information.
VERY IMPORTANT
In the Manual bag you will find a product card with your serial number. Please take a moment to register
your kit online via our website:
It is extremely important that you take a moment to register your helicopter with us. This is the only way
to ensure that you are properly informed about changes to your kit, such as upgrades, retrofits and other
important developments. SAB Heli Division cannot be held responsible for issues arising with your model
and will not provide support unless you register your serial number.
The Serial number is also engraved in the Aluminum Main Plate.
Thank you for your purchase, we hope you enjoy your new Goblin helicopter!
SAB Heli Division
6 – Installation of Carbon Rod and Tail Fin
7 – Installation of Swashplate Servos
8 – Head Sytem
9 – Assembly of the Main Module
10 – Installation of ESC, FBL,
RX Unit and Anti-Static System
1 – Serial Number
2 – Important Notes
3 – Components and Box
4 – Tail System
5 – Motor Assembly
INDEX
11 – Battery and Canopy
12 – In flight
13 – Maintenance
14 – Spare Parts
SPECIFICATIONS
Main rotor diameter : 626mm (with 280mm Main Blades)
Tail rotor diameter : 139mm (with 50mm Tail Blades)
Weight including standard electronics: 735g (excluding batteries)
COMPETITION SAB Direct Driver motor included
SAB 60 A ESC Included
Micro servos size ( Not Included )
Battery compartment: 34x42x75 mm
Chapter 1, Serial Number
To Next Page
Loading...
