Goblin MINI COMET - Page 27

Page 26
Chapter 14, Spare Parts
- 1 x Tail Shaft.
- 1 x Set Screw M2.5x4mm.
- 1 x Set Screw M3x4mm.
Tail Belt Guide
(H0872-S)
Tail Shaft
(H0842-S)
- 2 x Tail Belt Support.
- 2 x Tail Belt Ilder.
- 1 x Carbon Rod Support.
- 4 x Flanged Bearing
4x 7x2.5mm.
- 2 x Head Cap Screw M2.5x8.
- 2 x Flat Cap Screw M2.5x5.
Main Plate
(H0873-S)
- 1 x Main Plate.
- 2 x Nylon Nut M3.
ESC Support
(H0885-S)
- 1 x ESC Support.
- 2 x Finishing Washer M2.5.
- 2 x Head Cap Screw M2.5x8.
Tail Servo Support
(H0886-S)
Boom Yellow/Red
Goblin Minicomet
(H0919-S)
Canopy Yellow/Red
Goblin Minicomet
(H0920-S)
Boom Black/Red
Goblin Minicomet
(H0921-S)
Canopy Black/Red
Goblin Minicomet
(H0922-S)
Red Fin Minicomet
(H0923-S)
Red Landing Gear Minicomet
(H0924-S)
- 1 x Tail Servo Support.
- 2 x Head Cap Screw M2.5x10.
- 1 x Boom Yellow/Red. - 1 x Canopy Yellow/Red. - 1 x Boom Black/Red. - 1 x Canopy Black/Red. - 1 x Red Fin MiniComet.
- 1 x Red Landing Gear.
- 2 x Head Cap Screw M2.5x10.
Tail Locking Element
Goblin Minicomet
(H0910-S)
- 2 x Locking Element.
- 2 x Double Side-Tape.
- 4 x Head Cap Screw M2x6.
- 4 x Washer
2.5x 4.5x0.5.