ENG - 53
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, spot and
streak free drying.
Only use branded rinse aid for dishwasher. Never ll the rinse aid dispenser with any other
substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.
If there is no rinse-aid warning light on the control panel, you can judge the amount of rinse-aid
by the color of the optical level indicator „D“ located next to the cap. When the rinse-aid
container is full, the whole indicator will be dark. As the rinse aid diminishes, the size of
the dark dot decreases. You should never let the rinse aid get below ¼ full.
As the rinse aid diminishes, the size of the black dot
on the rinse aid level indicator changes, as illustrated below.
Full
¾ full
½ full
¼ full – Should rell to eliminate spotting
Empty
D (Rinse-Aid indicator)
1
2
3
4
5
6
MAX
1
2
3
1
To open the dispenser, turn the cap to the “open” (left) arrow and lift it out.
2
Pour the rinse aid into the dispenser, be careful not to overll.
3
Replace the cap by inserting it aligned with “open” arrow and turning it to the “closed” (right)
Arrow.
The rinse aid is released during the nal rinse to prevent water from forming droplets on your
dishes that can leave spots and streaks. It also improves drying by allowing water to sheet off
the dishes.
Your dishwashers are designed to use liquid rinse aids. The rinse aid dispenser is located inside
the door next to the detergent dispenser.
To ll the dispenser, open the cap and pour the rinse aid into the dispenser until the level
indicator turns completely black. The volume of the rinse aid container is about 140 ml.
Be careful not to overll the dispenser, because this could cause over sudsing. Wipe away any
spills with a damp cloth. Don‘t forget to replace the cap before you close dishwasher door.
To Next Page
Loading...
