security reason, you need correct password to enter the configuration pages.
! NOTICE
⚫ The default password is “1111”, you can change the password later from the “IP Setting” tab.
IP Setting
The IP Setting tab can change the printer name, Port number, Gateway setting and the password for configuring the
printer. You can also set the printer’s IP address ether by DHCP or by Static IP.
You can press “Set” button to apply the settings and “ReGet” button to refresh the setting values.
! NOTICE
⚫ To fully benefit from the NetSetting software, you should be familiar with basic networking
principles. Please contact your network administrator for related network setting information
To Next Page
Loading...
