Godex G500 - Printer Safety Instructions

SAFETY INSTRUCTIONS Please read the following instructions carefully.

Keep the equipment away from humidity.

Before you connect the equipment to the power outlet, please check the voltage of the power
source.

Make sure the printer is off before plugging the power connector into the power jack.

It is recommended that you connect the printer to a surge protector to prevent possible
transient overvoltage damage.

Be careful not to get liquid on the equipment to avoid electrical shock.

For safety and warranty reasons, ONLY qualified service personnel should open the equipment.

Do not repair or adjust energized equipment under any circumstances.
G500 Series
Safety Instructions
P/N : 920-014011-00