Godex GodexLAN - Maintenance; Printer Firmware Upgrade; Server Factory Default; Server Firmware Upgrade

Software Operation Manual 23
 Maintenance
If you want to restore factory default values of the Server and upgrade new firmware of Ethernet/Wireless
LAN or printer, you can use the Maintenance tool:
 Printer Firmware Upgrade: click Open to find the firmware file to be upgraded. Click Upload to
upload the firmware into the printer.
 Server Factory Default: click this button, the Server will restore factory default values.
 Server Firmware Upgrade: click Open to find the firmware file to be upgraded. Click Upload to
upload the firmware into the Server.
 Restart Server: click this button, the Server will restart.