Need help?Do you have a question about the Godex RT700 SERIES and is the answer not in the manual?
General| Print Method | Thermal Transfer / Direct Thermal |
|---|---|
| Print Resolution | 203 dpi |
| Memory | 8 MB Flash, 16 MB SDRAM |
| Max Print Speed | 5 ips |
| Max Print Length | 1727 mm (68") |
| Processor | 32-bit RISC |
| Interface | USB, Serial, Ethernet |
| Media Type | Continuous, Die-cut, Fan-fold |
| Media Width | 25.4 mm - 118 mm (1" - 4.64") |
| Media Thickness | 0.06 mm - 0.25 mm |
| Media Roll Diameter | 127 mm (5") |
| Ribbon Width | 30 mm - 110 mm (1.18" - 4.33") |
| Power | 100-240V AC, 50/60Hz |
| Dimensions | 285 mm (L) x 210 mm (W) x 171 mm (H) |
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
| Storage Temperature | -4°F to 122°F (-20°C to 50°C) |
Instructions for assembling and loading a new ribbon module into the printer.
Procedure for properly loading the label stock onto the printer's supply module.
Guide to installing necessary printer drivers and GoLabel software from the CD.
Steps to calibrate label size and perform a self-test for print quality verification.
Table detailing error messages, causes, and specific solutions for printer issues.
Steps for cleaning the print head to ensure optimal print quality and longevity.
Solutions for common printer problems, including error messages and operational issues.
To Next Page
