Need help?Do you have a question about the Godex ZX400+ Series and is the answer not in the manual?
Important warnings and precautions for safe operation of the printer.
Lists all items included in the printer package.
Introduces the printer's front and rear views and key components.
Step-by-step guide on how to load label rolls into the printer.
Instructions for properly installing and removing the printer ribbon.
How to connect the printer to a computer using various cables.
Guide to installing essential software for printer operation.
Explains the functions of the printer's LED indicators and buttons.
Overview of the printer's LCD screen and navigation.
How to configure network settings via the LAN interface.
Instructions for setting up or managing the LCD screen password.
Details on navigating and using various functions on the printer's LCD.
How to calibrate label size and perform a self-test.
Information on printer error messages, beeps, and their solutions.
Using the USB host port for memory sticks, keyboards, or scanners.
Steps to install the software for managing network configurations.
Navigating and using the NetSetting software interface.
Preparations needed before installing optional printer modules.
Instructions for installing the cutter accessory.
Guide for installing the rotary cutter module.
Steps for installing the label dispenser accessory.
Guide to installing the WiFi communication module.
Instructions for installing the Bluetooth communication module.
How to install and remove the printer's print head.
Steps to adjust the print line for better print quality.
How to adjust the tension of the ribbon for optimal printing.
Procedures for cleaning the printer's thermal print head.
How to adjust print head pressure for even ink distribution.
Adjusting ribbon shield screws to prevent ribbon wrinkling.
Configuration and maintenance of the cutter accessory.
Common printer problems and their solutions.
Important warnings and precautions for safe operation of the printer.
Lists all items included in the printer package.
Introduces the printer's front and rear views and key components.
Step-by-step guide on how to load label rolls into the printer.
Instructions for properly installing and removing the printer ribbon.
How to connect the printer to a computer using various cables.
Guide to installing essential software for printer operation.
Explains the functions of the printer's LED indicators and buttons.
Overview of the printer's LCD screen and navigation.
How to configure network settings via the LAN interface.
Instructions for setting up or managing the LCD screen password.
Details on navigating and using various functions on the printer's LCD.
How to calibrate label size and perform a self-test.
Information on printer error messages, beeps, and their solutions.
Using the USB host port for memory sticks, keyboards, or scanners.
Steps to install the software for managing network configurations.
Navigating and using the NetSetting software interface.
Preparations needed before installing optional printer modules.
Instructions for installing the cutter accessory.
Guide for installing the rotary cutter module.
Steps for installing the label dispenser accessory.
Guide to installing the WiFi communication module.
Instructions for installing the Bluetooth communication module.
How to install and remove the printer's print head.
Steps to adjust the print line for better print quality.
How to adjust the tension of the ribbon for optimal printing.
Procedures for cleaning the printer's thermal print head.
How to adjust print head pressure for even ink distribution.
Adjusting ribbon shield screws to prevent ribbon wrinkling.
Configuration and maintenance of the cutter accessory.
Common printer problems and their solutions.
General| Brand | Godex |
|---|---|
| Model | ZX400+ Series |
| Category | Label Maker |
| Language | English |
To Next Page
