Need help?Do you have a question about the Godex LZX400i and is the answer not in the manual?
Provides essential precautions for safe operation, handling, and maintenance.
Highlights specific warnings regarding battery replacement, disposal, and unauthorized modifications.
Lists all items included in the printer package, with visual aids.
Provides initial steps and visual guidance for loading a label roll into the printer.
Outlines connecting the power adapter and USB/parallel cable to the printer and host.
Details selecting the option to install printer drivers and proceeding.
Details how to select and enable the DHCP function for network configuration.
Explains the automatic label height detection and calibration process.
Guides on how to initiate and interpret a printer self-test page.
Details the function and use of the hardware calibration button.
Lists error messages, beeps, descriptions, and solutions for the ZX400i series.
Describes errors related to memory full, file not found, and duplicate names.
Explains error alerts using LED indicators and beep signals for the ZX400 series.
Details errors for print head open, overheat, and ribbon status.
Describes errors related to media detection, paper jams, and label finish.
Details the steps for updating the printer's firmware using a USB memory stick.
Guides on inserting the CD and selecting the NetSetting software for installation.
Details setting IP Address, Subnet Mask, and Gateway.
Details how to set printer parameters like model, speed, and darkness.
Guides on specifying firmware file and starting the download process.
Provides steps for installing the guillotine cutter module.
Provides steps for installing the rotary cutter module.
Guides on safely removing and installing the print head module.
Details loosening screws and turning the print head to the correct position.
Explains how to adjust print head pressure for better print line alignment.
Details adjusting the ribbon tension using the shaft knob for optimal printing.
Provides step-by-step instructions for cleaning the thermal print head.
Guides on adjusting TPH spring boxes for print head pressure and balance.
Explains how to adjust ribbon shield screws to improve print quality.
Details removing the cutter cover, cleaning jams, and reinstalling the cutter.
Addresses issues with the printer not lighting up or LEDs indicating errors.
Covers issues like no image, blurred image, or incorrect positioning.
Addresses problems with label jams, skipping, and cutter malfunctions.
Provides essential precautions for safe operation, handling, and maintenance.
Highlights specific warnings regarding battery replacement, disposal, and unauthorized modifications.
Lists all items included in the printer package, with visual aids.
Provides initial steps and visual guidance for loading a label roll into the printer.
Outlines connecting the power adapter and USB/parallel cable to the printer and host.
Details selecting the option to install printer drivers and proceeding.
Details how to select and enable the DHCP function for network configuration.
Explains the automatic label height detection and calibration process.
Guides on how to initiate and interpret a printer self-test page.
Details the function and use of the hardware calibration button.
Lists error messages, beeps, descriptions, and solutions for the ZX400i series.
Describes errors related to memory full, file not found, and duplicate names.
Explains error alerts using LED indicators and beep signals for the ZX400 series.
Details errors for print head open, overheat, and ribbon status.
Describes errors related to media detection, paper jams, and label finish.
Details the steps for updating the printer's firmware using a USB memory stick.
Guides on inserting the CD and selecting the NetSetting software for installation.
Details setting IP Address, Subnet Mask, and Gateway.
Details how to set printer parameters like model, speed, and darkness.
Guides on specifying firmware file and starting the download process.
Provides steps for installing the guillotine cutter module.
Provides steps for installing the rotary cutter module.
Guides on safely removing and installing the print head module.
Details loosening screws and turning the print head to the correct position.
Explains how to adjust print head pressure for better print line alignment.
Details adjusting the ribbon tension using the shaft knob for optimal printing.
Provides step-by-step instructions for cleaning the thermal print head.
Guides on adjusting TPH spring boxes for print head pressure and balance.
Explains how to adjust ribbon shield screws to improve print quality.
Details removing the cutter cover, cleaning jams, and reinstalling the cutter.
Addresses issues with the printer not lighting up or LEDs indicating errors.
Covers issues like no image, blurred image, or incorrect positioning.
Addresses problems with label jams, skipping, and cutter malfunctions.
General| Brand | Godex |
|---|---|
| Model | LZX400i |
| Category | Label Maker |
| Language | English |
To Next Page
