----Should liquid from damaged batteries come into contact with skin or clothing, rinse immediately with
fresh water.
Parts
Body
01. ON/OFF Switch
----Power on (ON)
----Power off (OFF)
02. LCD display
03. Power-Control Group Select Dial (POWER)
04. Channel Select Switch (CHANNEL)
05. Set Button (SET)
06. Buzz Switch (BUZZ)
07. Modeling Lamp (LAMP)
AF-assist Beam Switch
08. Test Button (TEST)
09. <－> Button
10. <＋> Button
11. Hot shoe
12. Indicator
13. Antenna
14. Battery Compartment
15. Wireless Control Plug
Transmitter FT-16
Receiver FTR-16
Battery
The transmitter needs two size-AA batteries (not provided). The receiver draws power from a flash
through the flash’s Wireless Control Port.
Slide the battery compartment cover of the transmitter and insert the batteries as shown in the
illustration.
Note：
Low Battery Indication
When the battery power (＜2.2V) gets low,
is shown on the LCD display. Please change batteries
as low battery power leads to no flash or flash missing in case of long distance.
To Next Page
Loading...
