Maintenance
1. Avoid sudden drops. The device may malfunction after strong shocks or impacts.
2. Keep dry. The device is not water-proof. Malfunction, rust, and corrosion may occur and the device
may go beyond repair if immersed in water or expose to high humidity.
3. Avoid sudden temperature changes. Condensation may happen if the ambient temperature
changes suddenly, for example, in a case when the trigger set is taken out of a build with a high
temperature to outside in winter. Please put the trigger set in a handbag or plastic bag beforehand.
4. Keep away from strong magnetic field. The strong static or magnetic field produced by devices
such as ratio transmitters leads to malfunction.
To Next Page
Loading...
