To Next PageTo Next Page
Need help?Do you have a question about the Godox SK300II and is the answer not in the manual?
General| Power Output | 300Ws |
|---|---|
| Color Temperature | 5600K ± 200K |
| Modeling Lamp | 150W |
| Triggering Method | Sync cord, Test button, Slave triggering, Wireless control port |
| Fuse | 5A |
| Model | SK300II |
| Type | Monolight |
| Cooling System | Fan |
| Mounting | Bowens Mount |
| Guide Number | 58 (ISO 100) |
| Flash Duration | 1/2000s - 1/800s |
| Wireless Control | Built-in 2.4G wireless receiver |
| Power Supply | AC 100-120V/60Hz or 200-240V/50Hz |
| Modeling Lamp Control | Prop |
| Operating Voltage | 100-120V/60Hz or 200-240V/50Hz |
| CRI | >=96 |
| TLCI | >=97 |
Identifies the main physical components of the flash unit.
Explains the indicators and information displayed on the LCD screen.
Lists standard accessories included with the flash unit.
Lists optional accessories that can enhance photography effects.
Instructions for attaching the lamp, cover, and standard reflector.
How to connect the flash unit to an AC power source.
Guide to controlling the modeling lamp's mode and brightness.
How to adjust the flash power output using the select dial.
Explains the function of the test button for firing the flash.
How to connect a sync cord for camera synchronization.
How to use the GR/CH button to adjust wireless group and channel.
Details on setting up the flash as a slave unit using optical triggers.
