Maintenance
• This product, except consumables e.g. battery, power cable and connect cable, is supported
with a one-year warranty.
• Avoid sudden impacts and the product should be dedusted regularly.
• Maintenance of the flash must be performed by our authorized maintenance department
which can provide original accessories.
• Unauthorized service will void the warranty.
• If the product had failures or was wetted, do not use it until it is repaired by professionals.
• Changes made to the specifications or designs may not be reflected in this manual.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
LED Light
Power Supply
Output Power
Channel
Group
ID
Color Temperature
Light Adjustment Range
100% Illuminance(LUX)
(with standard reflector,
testing distance, 1m)
CRI
TLCI
Temperature of Working Environment
Light Effect Mode
Control Method
Bluetooth Transmission Distance
2.4G Wireless Transmission Distance
Beam Angle
Dimension
Net Weight
BT Frequency Range
Max. Transmitting Power
SL100Bi
AC100V~240V(50/60HZ)
100W
32
16(0~9/A B C D E F)
OFF/1-99
2800K~6500K
0%~100%
Max. 32100
≥96
≥97
-10° - 40°
11
Smartphone APP/2.4G Wireless
≈30m
≈30m
120°
243*205*127mm
1.6kg (not include reflector)
2402.0-2480.0MHz
5dbm
Changes made to the specifications or designs may not be reflected in this manual.
Technical Data
Failures Reminder
lighting indicates fan failure, flashing indicates failure.
lighting indicates high temperature alarm, flashing indicates high temperature
protection status and light automatically enters the shutdown procedure.
- 15 - - 16 -
To Next Page
Loading...
