GOK BC-1 Series User Manual

9 / 16
Unplug the device if it is not in use and when it is being cleaned!
Can result in short circuit or electric shock.
Do not open the housing when the device is connected to the power supply!
Do not use cleaning agents to clean the device!
Use only a dry cloth to clean the device!
Damaged or destroyed insulation!
Can result in short circuit or electric shock.
Do not use the device if the insulation is damaged!
Have new insulation installed by a specialised company!
Observe the safety precautions and the assembly and operating instructions of connected
devices.
Indicator Type BC-1-1 and BC-1-2 – Sectional View
Electrical Installation
Connection Lines Between the Indicator and the Probe
Line cross-section
2 x 1mm
2
(Cu)
2 x 1.5mm
2
(Cu)
maximum length
100m
200m
Version
e.g. H05VV-F ; NYM or
similar
Extension via special
accessories for cable
connection fitting
Port
Terminals 4 and 5 - sensor
Supply voltage
Supply voltage
230V AC 50Hz
Connection to terminals L1
and N – network
Overfill prevention divice type BC-1
part no. 308 393 _15 700 71 a

GOK BC-1 Series Specifications

General

Brand	GOK
Model	BC-1 Series
Category	Measuring Instruments
Language	English