TECHNICAL SPECIFICATIONS
MAIN DETAILS
Power output: 2 x 75W @ 8Ω in stereo mode and
up to 600W @ 4Ω in mono (BTL).
Frequency response: 10Hz-30kHz at +/-1dB
THD+N – Total Harmonic Distortion: 0,05%
Noise floor: -80dBV
Damping factor: selectable high/low
AUDIO INPUTS
Stereo RCA, stereo XLR balanced
Input sensitivity: 1,4V RMS on RCA and 1,4V RMS on XLR
Input impedance: 13KΩ RCA/XLR
AUDIO OUTPUTS
Speaker terminals: Gold Plated Binding Posts
POWER
Mains supply: 100/240V, 50/60Hz
Power consumption: <1W in standby | <10W no
signal
170W at a 1/4 of nominal power | 1400W max.
DIMENSIONS & WEIGHT
Dimensions: 200mm W x 80mm H x 260mm D
Total weight: 4kg
FINISHES
Brushed Aluminum: Black, Silver or Gold
HIGH POWER AMP
The PA-10 is capable of:
2 x 75W @ 8Ω Stereo load
2 x 150W @ 4Ω Stereo load
2 x 300W @ 2Ω Stereo load
1 x 300W @ 8Ω Mono (BTL) load
1 x 600W @ 4Ω Mono (BTL) load
ADJUSTABLE DAMPING FACTOR
Adjustable GN property Damping Factor playing
alternatively more difficult low sensitivity speakers
or easy load and mini monitors.
GN LINK
The 3.5mm plugs GN LINK IN & GN LINK OUT are
used to synchronize the PA-10 amplifier with other
units with the same feature allowing a simultaneous
switching ON/OFF (Master-Slave- Mode).
5
To Next Page
Loading...
