REAR PANEL
POWER
7. MASTER SWITCH ON/OFF
8. AC IEC plug with integrated fuse
holder drawer 6,3A T 5x20mm at
100/240V
9. Press BTL switch for use in
Mono, the Led above turns blue.
Press DF switch for low damping
factor , the Led above turns blue.
Press XLR switch to activate the XLR
inputs, the Led above turns blue.
GN LINK
10. 12V IN trigger with 3.5mm plug
to synchronise the switching ON/OFF
11. 12V OUT trigger with 3.5mm
plug to synchronise the switching
ON/OFF
AUDIO INPUTS
STEREO MODE
1. XLR LEFT balanced input
2. XLR RIGHT balanced input
3. RCA LEFT unbalanced input
4. RCA RIGHT unbalanced input
PLEASE NOTE:
IN MONO
(
BTL
)
MODE ONLY THE LEFT
INPUTS ARE ACTIVE.
SPEAKER OUT
STEREO MODE
5. LEFT CHANNEL
6. RIGHT CHANNEL
PLEASE NOTE:
IN MONO
(
BTL
)
MODE, CONNECT THE
POSITIVE SPEAKER TERMINAL TO THE
POSITIVE LEFT CHANNEL OUTPUT AND
THE NEGATIVE SPEAKER TERMINAL TO
THE NEGATIVE RIGHT CHANNEL OUTPUT.
9
8
7
1
5
2
6
3
4
11
10
XLR DF BTL
OUT IN
+ -
R L
R L
R L
+ -
RIGHT LEFT
7
To Next Page
Loading...
