10
|
POWER ADAPTER
| AND SPEED CONTROL
EN
DE
IT
CONNECTING THE POWER SUPPLY
Before plugging the power adapter in to the
AC make sure the speed control unit and
turntable are correctly connected with the
supplied cable.
PLEASE NOTE
Use only the original power adapter to
power the turntable to ensure the correct
functioning.
TURNTABLE SPEED CONTROL
33rpm:
Starts and stops the 33
1
/
3
rpm speed.
The LED light ashes every time the button
is pressed.
45rpm:
Starts and stops the 45rpm speed.
The LED light ashes every time the button
is pressed.
PITCH CONTROL MODE
Please check page 4 for detailed instructions
on how to ne adjust the speed of your
turntable.
Power adapter
Speed control cable
33 RPM 45 RPM
To Next Page
Loading...
