13
| DETACHABLE DUST COVER
The dust cover features detachable hinges, a
new proprietary design developed to let you
enjoy your turntable at the best.
The hinges provide a stop point at about
90°: in this position the dust cover is stable
and held in place by the hinges.
Removing the dust cover is simple and
quick: lift the dust cover until it reaches the
90° stop point and it’s completely opened,
then gently slide it towards LEFT (facing the
turntable) to detach it from the plinth.
Please note: the dust cover can be removed
and reinserted only when it’s in its resting
position, at 90°.
To Next Page
Loading...
