Goldmaster CD-3090 USB - Menu Function

EN - 10
PLAYING MP3/WMA FILES
When playing a disc of 8kbps or VBR*, the
elapsed playing time in the display window
will not be correct and also the intro play
may not function properly.
*VBR: Variable Bit Rate.
Note on creating your own CD-Rs or
CD-RWs containing MP3 fles
To e n j o y h i g h qu a l i t y so u n d , w e
recommend converting to MP3 files with
a sampling frequency of 44.1 kHz and a
fxedbitrateof128kbps.
DO NOT store more than 256 MP3 files
per disc.
For ISO 9660-compliant format, the
maximum allowable depth of nested folders
is 8, including the root directory(folder).
When CD-R disc is used, playback is
possible only for discs which have been
fnalized.
Make sure that when MP3 CD-R is burned
that it is formatted as a data disc and NOT
as an audio disc.
You should not write non-MP3 files or
unneededfoldersalongwithMP3fleson
the CD-R otherwise it takes a long time
until the unit starts
toplayMP3fles.
With some CD-R media, data may not
be properly written depending on their
manufacturing quality. In this case, data
may not be reproduced correctly. High
quality CD-R disc is recommended.
Up to 16 characters are displayed for the
name of an Album or a Track. ID3 TAG
version 1.x is required.
Note that the unit may not play tracks in
the order that you wrote them to the disc.
Press VOL knob more than 2 seconds to enter
menu mode, then each press changes the
mode as follows:
TA mode -> MASK mode -> TA VOL mode ->
RETUNE mode -> DSP mode -> ESP mode ->
MULT mode -> LOUD ON/OFF mode
-> BEEP ON/OFF -> SEEK1/2 mode(only in
tuner mode) -> ST/MO mode(only in tuner
mode) -> LOCAL/DX mode(only in tuner mode)
-> VOL mode -> 12/ 24 HOUR mode
— — — — — — — — — — — — — — — — — — — —
TA mode
Rotate the knob to choose TA ALARM or TA
SEEKmode. IftheTA(traffc announcements)
is turned on and there is no traffic program
identification code received in the specified
time, no TA/TP will display and either TA
ALARM or TA SEEK will be activated.
TA ALARM mode : Alarm is turned on.
TA SEEK mode: TA SEEK is automatically
activated.
— — — — — — — — — — — — — — — — — — — —
MASK mode
Rotate the knob to choose MASK DPI or MASK
ALL mode.
In some cases, the AF function may be
infuenced bysomeinterference,examplesare
signals with strong
feld butwithouttheRDSdata.Forthisreason,
the unit has two options to avoid the above
interference.
MASK DPI mode :
Menu Function