Description of the monitor when receiving a call and during communication.
4
*
( )
*
( )
ART /G2+ M4 ONITOR
Web code 50122527
Golmar se reserva el derecho a cualquier modificación sin previo aviso.
Golmar se réserve le droit de toute modification sans préavis .
Golmar reserves the right to make any modifications without prior notice.
golmar@golmar.es www.golmar.es
Sistemas de comunicación S.A.
For more information, see user manual“TART 4/G2+ (code 50122527)”.
https://doc.golmar.es/search/manual/50122527
ART /G2+4 MONITOR
EN EN
Communication screen
Door panel call screen
The screen
.
is displayed during a communication process. In the top centre of the screen, the date and time
are shown and, on the right, the source of the image is displayed Communication has a maximum duration
of 90 seconds.
The screen is displayed when receiving a call or pressing icon of the main menu. During a call, icon
displayed on the screen will blink green (during the call process). In the top centre of the screen, the date
and time are shown and, on the right, the source of the image is displayed. The call has a duration of 45
seconds.
.
Press the button below icon for 3 seconds to access the image and
monitor. Select the option to be modified by pressing the buttons below corresponding
icons / , change to the desired level by pressing the buttons below corresponding icons
/ and validate the changes made by pressing the button below icon
call tone volume settings
menu during a call process or communication volume settings menu during a communication
process
...... ......
.
Press the button below icon / to s thetart or end communication with the door panel
displayed. Communication has a maximum duration of 90 seconds. Once communication
has ended, the screen will turn off.
Press the button below icon hange the source of the image as long as the system has more
than one door panel or has an external camera connected and display has been activated (see
). It is possible to make the change during
display, call and communication processes.
to c
monitor manual and corresponding door panel manual
Press the button below icon to a 1ctivate the lock release (or device connected to the output
of the door panel) for 3 seconds (factory setting, programmable by the installer; see
relay
monitor
manual and corresponding door panel manual).
Press the button below icon to a 2ctivate the lock release (or device connected to the relay output
of the door panel) for 3 seconds (factory setting, programmable by the installer; ees monitor
manual and corresponding door panel manual)).
Press the button below icon for 3 seconds, it records a video. to set the
recording mode
(See monitor manual
).
if you have a MicroSD card inserted, it starts recording a 15-second video within a few seconds of
receiving the call. Otherwise, it will take a photograph. In the top left of the screen, icon is
displayed.
1
2
Press the button below icon for 1 second (See monitor manual
).
, it takes a photograph. to set the
recording mode
A few seconds after receiving a call, it automatically takes a photograph. In the top left of the screen,
icon is displayed.
A B
A
B
QUICK GUIDE
T EART 4/G2+ N GR REV.0120
50122752
09:27
04 - 05 - 2020
2
04 - 05 - 2020 11 : 17
1
1 2
1
1 2
04 - 05 - 2020 11 : 17
1
2