Need help?Do you have a question about the golmar ART 4 LITE/G2+ and is the answer not in the manual?
General| Type | Video Intercom |
|---|---|
| Model | ART 4 LITE/G2+ |
| Communication Type | Hands-free |
| Mounting | Surface |
| Door release | Yes |
| Call volume control | Yes |
| Material | Plastic |
| Color | White |
| Backlight | No |
| Compatibility | G2+ system |
| Installation | Surface-mounted |
| Dimensions | 133 x 183 x 22 mm |
| Display | 4.3-inch TFT |
| Operating Temperature | -10°C to +55°C |
Essential safety guidelines for installing and handling the monitor to prevent damage or injury.
Specific instructions for proper wiring and handling of the monitor components.
Details the physical components and interfaces of the monitor, including handset, screen, buttons, and ports.
Covers physical installation steps, connection terminals, and configuration switch functions.
Navigating the main menu to access settings, intercom, guard calls, and staircase light.
Enabling, disabling, and setting the duration for the 'Do not disturb' silent mode.
Accessing the live camera feed from the door panel via the main menu.
Step-by-step guide to enter and move between different settings screens.
General overview of the types of settings available within the menu.
Displays software version, address, master/slave status, and QR code for updates.
Instructions for restoring the monitor to its original factory default settings.
Setting the desired volume level for incoming calls and communication.
Choosing different ringtones to identify call origins.
Actions like ending calls, activating staircase light, and changing image source.
Initiating audio communication and activating the door lock release.
Adjusting volume and changing the image source during an active communication.
Activating the door lock release mechanism while in communication.
Modifying the screen's brightness level for optimal visibility.
Modifying the screen's contrast level for better image definition.
Modifying the screen's color balance and saturation.
Adjusting the call tone and communication volume levels.
Defining specific hours for the monitor to remain silent during incoming calls.
Activating or deactivating the intercom feature between apartments.
Setting timed periods for automatic door opening after a call.
Instructions for making and receiving intercom calls within the same apartment.
Steps for making intercom calls to other apartments, including apartment code selection.
Configuring a monitor as a guard unit, including address and master/slave settings.
How the guard monitor functions and its capabilities within the system.
Instructions for apartment monitors to initiate a call to the guard monitor.
Codes for configuring video sources and defining the master or slave role of monitors.
Codes for automatic door opening, DND display, and LED indicator settings.
Codes for relay delays, light up duration/delay, and guard monitor assignments.
Specific codes for configuring video sources from general door panels.
Guidelines for safely cleaning the monitor screen and casing without damage.
Confirmation of the product's compliance with applicable European EMC directives.
Conditions under which the device is permitted to operate without causing interference.
To Next Page
