23
SPECIAL CODES
The enabling of some functions, as well as the modification of some factory parameters, can be carried out by entering
special codes. To do so, the installer menu must be accessed from the monitor. Go to the 'About' screen in the
Settings menu (p. ) and press five times on button of the monitor.8
The 'special codes' screen will then be displayed. Press the button below icon to select the field to be modified and
press the buttons below icons / to enter the desired code. Once the code has been entered, press the button
below icon to validate it. If the code entered is valid, icon will be displayed; if it is not, icon will be shown.
Press the button below icon to return to the 'About' screen.
‘Special codes' screen
Continued overleaf
Press 5 times
FW
0 /01 M
2 1.0
'About' screen
0 4 4 1
# #
# #
ART /G2+4 MONITORLITE
Note: New menu available with V.04 of ART 4 LITE G2+ and ART 4H LITE G2+ monitors, with V.05 of ART 4B
LITE G2+ monitor and with V.01 of the ART 4TH LITE G2+ monitor.
To Next Page
Loading...
