25
Continued from previous page.
SPECIAL CODES
Configuration of the remote activation button (Door panel ). (Configure onlyon the master monitor).Relay1 2
Factory setting
Delay From to1400 (0,5s) 1419 (10s)1403 (2s)
Configuration of the remote activation button (Door panel ). (Configure onlyon the master monitor).Relay2 2
Factory setting
Delay From 5 to 5 51 00 (0,5s) 1 19 (10s)1 03 (2s)
LED lights for night viewing (Door panel ) during a call or communication process. (Configure only on the master3
monitor).
Automatic OFFAlways ON Always Factory setting
2450 2451 2452 2450 (automatic).
Activation times of the outputs (Door panel ). (Configure only on the master monitor).3
Factory setting
Relay 1 From to2200 (0,5s) 2219 (10s)2205 (3s)
Rel 2300 (0,5s) 2319 (10s)2305 (3s)ay 2 From to
Configuration of the remote activation button (Door panel ). (Configure onlyon the master monitor).Relay1 3
Factory setting
Delay From to2400 (0,5s) 2419 (10s)2403 (2s)
Configuration of the remote activation button (Door panel ). (Configure onlyon the master monitor).Relay2 3
Factory setting
Delay From 5 to 5 52 00 (0,5s) 2 19 (10s)2 03 (2s)
LED lights for night viewing (Door panel ) during a call or communication process. (Configure only on the master4
monitor).
Automatic OFFAlways ON Always Factory setting
3450 3451 3452 3450 (automatic).
Activation times of the outputs (Door panel ). (Configure only on the master monitor).4
Factory setting
Relay 1 From to3200 (0,5s) 3219 (10s)3205 (3s)
Rel 3300 (0,5s) 3319 (10s)3305 (3s)ay 2 From to
Configuration of the remote activation button (Door panel ). (Configure onlyon the master monitor).Relay1 4
Factory setting
Delay From to3400 (0,5s) 3419 (10s)3403 (2s)
Configuration of the remote activation button (Door panel ). (Configure onlyon the master monitor).Relay2 4
Factory setting
Delay From 5 to 5 53 00 (0,5s) 3 19 (10s)3 03 (2s)
To define the light up duration time from 1 to 99 seconds (SAR-G2+ Relay). ( ).
Configure only on the master monitor
Factory setting
From 1801 (1s) to 1899 (99s) 1803 (3s).
To define the light up delay time from 0 to 99 seconds (SAR-G2+ Relay). ( ).Configureonly on the master monitor
Factory setting
From 1900 (0s) to 1999 (99s) 1900 (0s)
Configuration as a guard monitor. (Configure only on the master monitor).
End guard monitor Guard monitor
Factory setting
5000 5001 5000 (End guard monitor)
*
( )
*
( )
*
( )
*
( )
*
( )
*
( )
*
( )
*
( )
*
( )
*
( )
Continued overleaf
ART /G2+4 MONITORLITE
To Next Page
Loading...
