golmar T-ART/G2+ User Manual

INSTALLATION OF THE TELEPHONE IN AN EMBEDDING BOX:
Make a hole in the wall to position the top of the universal embedding box at a height of 1.60 m from the ground. The
minimum distance between the sides of the embedding box and the closest object must be 5 cm.
Positioning the embedding box:
1.60m
Pass the cable through the hole made in the embedding box. Embed the box and ensure that it is level and flush.
Fix the wall mounting connector of the telephone to the embedding box with the screws supplied.
Positioning the embedding box and fitting the wall mounting connector:
Positioning the telephone:
Avoid dusty or smoky environments or locations near sources of heat.
12
Connect the cables to the telephone (see p. 4), position the telephone in front of the wall mounting connector,
ensuring that the holes in the base of the telephone line up with those on the connector , and then move the
telephone downwards until the telephone is securely fixed to the connector .
Remember to remove the protective covering from the front of the telephone once installation has been
completed.
1
2
3
T-ART/G2+ TELEPHONE
Screws supplied with
the embedding box.
2 31

golmar T-ART/G2+ Specifications

General

Brand	golmar
Model	T-ART/G2+
Category	Telephone
Language	English