golmar T-ART/G2+ User Manual

INSTALLING THE TELEPHONE IN A WALL MOUNTING CONNECTOR:
The top of the wall mounting connector should be located at a height of 1.60m from the ground. The minimum distance
between the wall mounting connector and the closest object must be 5 cm.
Positioning the wall mounting connector:
Fix the telephone's wall mounting connector to the wall by drilling two 6mm diameter holes and using the screws and
plugs supplied with the telephone.
Fixing the telephone's wall mounting connector to the wall:
Positioning the telephone:
Avoid dusty or smoky environments or locations near sources of heat.
11
Connect the cables to the telephone (see p. 4), position the telephone in front of the wall mounting connector, ensuring
that the holes in the base of the telephone line up with those on the connector , and then move the telephone
downwards until the telephone is securely fixed to the connector .
Remember to remove the protective covering from the front of the telephone once installation has been
completed.
1
2
3
1.60m
T-ART/G2+ TELEPHONE
2 31
x4 30

golmar T-ART/G2+ Specifications

General

Brand	golmar
Model	T-ART/G2+
Category	Telephone
Language	English