golmar T-ART/G2+ User Manual

5
Description of the DIP switch and configuration of the telephone address (code):T-ART/G2+
TELEPHONE DESCRIPTION:
Edificio / Chalet (Placa Nexa)
Dip1 Dip :- 7 Note:1 128Sets the telephones address (addresses to ). Mixed installations with monitors (addresses 1 to 32).
The switches set to OFF have a zero value. The values of the switches set to ON are shown in the table below. The
telephone code is the sum of the values of the switches set to ON.
.
.
Dip -Dip :8 9 telephone onlyThese define whether the is master or slave. Each apartment must have one master
telephone.
Master Slave 1 Slave 2 Slave 3
.
Dip :10 Configures the end of line. In installations with telephones only, it must always be in the OFF position. In mixed
installations of monitors with in the same apartment, set to ON for the telephones in which theT-ART/G2+ telephones
BUS cable ends and leave in the OFF position for intermediate telephones.
IMPORTANT: in , see corresponding Kit Soul userT-ART/G2+ telephone Villa installation with SOUL door panel
manual for Kit features as maximum number of apartments and monitors/ART 1 G2+ telephone.
1 2 3
ON
Example: 0+ 0+4+0+16 0+0+ = 20
Switch number: 1 2 3 4 5 6 7
Val en ON: 1 2 4 8 16ue wh 32 64
Tabl vale of ues
4 5 6 7 8
Important:
Apartment 1 (Dip1 to ON & Dip2-Dip7 to OFF)
Apartment 128 (Dip1-Dip7 to OFF)
9 10
1 2 3
ON
4 5 6 7 8 9 10 1 2 3
ON
4 5 6 7 8 9 10 1 2 3
ON
4 5 6 7 8 9 10 1 2 3
ON
4 5 6 7 8 9 10
Configuration of telephone address codes (up to 2 addresses):T-ART/G2+ 1 8
Dip1 a Dip7: .To configure the telephone/apartment address (up to 2 addresses)T-ART/G2+ 1 8
Apartment code 1 Apartment code
2 Apartment code 3 Apartment code 4
1 2 3
ON
4 5 6 7 1 2 3
ON
4 5 6 7 1 2 3
ON
4 5 6 7
Apartment code 5
1 2 3
ON
4 5 6 7
Apartment code 6 Apartment code 7 Apartment code 8
1 2 3
ON
4 5 6 7 1 2 3
ON
4 5 6 7 1 2 3
ON
4 5 6 7
Apartment code 9
1 2 3
ON
4 5 6 7
Apartment code 10 Apartment code 11 Apartment code 12
1 2 3
ON
4 5 6 7 1 2 3
ON
4 5 6 7 1 2 3
ON
4 5 6 7
Apartment code 13
1 2 3
ON
4 5 6 7
1 2 3
ON
4 5
Apartment code 14
6 7 1 2 3
ON
4 5
Apartment code 15
6 7 1 2 3
ON
4 5
Apartment code 16
6 7
ON
1 2 3 4 5 6 7
Continued overleaf
T-ART/G2+ TELEPHONE
1 2 3
ON
4 5 6 7
Apartment code 17 Apartment code 18 Apartment code 19 Apartment code 20
ON ON ON
1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6 7
Important:
- Up to 32 apartments/T-ART telephones in mixed installations with monitors .(EL632 G2+ SE module)
- Up to 128 apartments/ te per installationT-ART lephones (EL6 2 G2 sound module required).4 +

golmar T-ART/G2+ Specifications

General

Brand	golmar
Model	T-ART/G2+
Category	Telephone
Language	English