golmar T562 G 2 User Manual

Fixing the telephone to the wall:
10
It is necessary to open the telephone for wiring and fixing
purposes. To open the telephone, insert a flat screwdriver
into the slots and gently pry open as shown in the drawing.
The telephone can be fixed to a universal embedding
box or directly to the wall. To fix directly to the wall, drill
two 6mm holes at the specified positions and use
6mm wall plugs and Ø3.5 x 25mm screws.
Pass the cables through the cable holes and connect them to the
connector as per the wiring diagram. Close the telephone as shown
in the drawing. Once the telephone is closed, connect the handset
using the telephone cord and place it on the hook.
Avoid dusty or smoky environments or locations near sources of heat. The telephone can be fixed to an electrical
embedding box or directly to the wall.
INSTALLING THE TELEPHONE
T562 GB2 TELEPHONE

golmar T562 G 2 Specifications

General

Brand	golmar
Model	T562 G 2
Category	Telephone
Language	English