golmar T562 G 2 User Manual

1 2 3
ON
4 5
Apartment code 105
6 7 1 2 3
ON
4 5
Apartment code 106
6 7 1 2 3
ON
4 5
Apartment code 107
6 7 1 2 3
ON
4 5
Apartment code 108
6 7
8
T562 GB2 TELEPHONE
DESCRIPTION OF THE TELEPHONE
1 2 3
ON
4 5
Apartment code 109
6 7 1 2 3
ON
4 5
Apartment code 110
6 7 1 2 3
ON
4 5
Apartment code 111
6 7 1 2 3
ON
4 5
Apartment code 112
6 7
1 2 3
ON
4 5
Apartment code 113
6 7 1 2 3
ON
4 5
Apartment code 114
6 7 1 2 3
ON
4 5
Apartment code 115
6 7 1 2 3
ON
4 5
Apartment code 116
6 7
1 2 3
ON
4 5
Apartment code 117
6 7 1 2 3
ON
4 5
Apartment code 118
6 7 1 2 3
ON
4 5
Apartment code 119
6 7 1 2 3
ON
4 5
Apartment code 120
6 7
1 2 3
ON
4 5
Apartment code 121
6 7 1 2 3
ON
4 5
Apartment code 122
6 7 1 2 3
ON
4 5
Apartment code 123
6 7 1 2 3
ON
4 5
Apartment code 124
6 7
1 2 3
ON
4 5
Apartment code 125
6 7 1 2 3
ON
4 5
Apartment code 126
6 7 1 2 3
ON
4 5
Apartment code 127
6 7 1 2 3
ON
4 5
Apartment code 128
6 7
'Doctor mode' function:
Description:
The 'doctor mode' function enables lock release 1 to be activated automatically 3 seconds after making a call from the
door panel without having to establish communication or press door release button . The call ends after 7 seconds
and the channel is free. (Only the master telephone should be configured with 'doctor mode').
Activating/deactivating 'doctor mode':
To activate 'doctor mode', the telephone must be in standby mode:
Turn the volume control switch to OFF.
To deactivate 'doctor mode', the telephone must be in standby mode:
Set the OFF position of the volume control switch to a medium or maximum position depending on the required call volume.
Configuring 'doctor mode':
To configure 'doctor mode' on the (master) telephone, access the DIP switch inside the telephone
and set DIP 12 to ON.
11 129 10
ON
Intercom function:
Intercom functionality between two points in the same apartment comes as standard with the T562 GB2 telephone.
The telephone must be in standby to make intercom calls.
To make an intercom call, pick up the handset and press intercom button , a number of tones on the telephone(s)
being called in the apartment will confirm that the call is being made.
The call needs to be answered within 40 seconds.
To establish communication, pick up the handset of the telephone called (or one of the telephones called if there is more
than one slave telephone).
Communication will last for one and a half minutes or until the handset is hung up.
Light activation function:
The telephone must be in standby with the handset hung up for light activation (SAR-GB2 and SAR-12/24 modules
required).
For light activation (e.g. 'staircase light'), press button .
Important: For connections and configuration, see the TSAR-GB2 and TSAR-12/24 manuals.
Continued from previous page.

golmar T562 G 2 Specifications

General

Brand	golmar
Model	T562 G 2
Category	Telephone
Language	English