15. DISMANTLING AND REMOVAL OF THE MACHINE (TIPPING)
With regard to the instructions for safe use, maintenance and servicing, the machine as a
whole has a fixed lifetime limit of 8 years. There are different lifetime limits for separate
components of the machine, so they must be regularly replaced with new ones in case of
certain problems, wear and tear and mechanical damage. Replacement can be performed only
by purchasing technically adequate or original spare parts.
After the lifetime of the machine expires:
After the lifetime expires, the whole machine has to be disposed of at a collection point that is
earmarked especially for such machines, and in accordance with waste classification.
16. KIT REGISTER
– book (instructions for use, Declaration of Conformity)
– additional pressing net,
– additional protection bag.
To Next Page
Loading...