Goodman APG 13 User Manual

RS6300007r7
March 2010
Copyright © 2007 - 2010 Goodman Manufacturing Company, L.P.
C
US
®
This Forced Air Central Unit Design Complies With
Requirements Embodied in The American National
Standard / National Standard of Canada Shown Below.
ANSI Z21.47•CSA-2.3 Central Furnaces
Service Instructions
APG/GPG 13 and 15
Gas Electric Package Units
with R-410A Refrigerant
& Accessories
This manual is to be used by qualified, professionally trained HVAC technicians
only. Goodman does not assume any responsibility for property damage or
personal injury due to improper service procedures or services performed by
an unqualified person.

Goodman APG 13 Specifications

General

Model	APG13
Compressor Type	Single-Stage
Refrigerant	R-410A
Operating Voltage	208/230V
SEER Rating	13
Cooling Capacity	1.5-5 tons
Stages	1

Summary

IMPORTANT INFORMATION

IMPORTANT NOTICES FOR CONSUMERS AND SERVICERS

Safety warnings, precautions, and responsibilities for technicians and users.

SAFE REFRIGERANT HANDLING

Guidelines for safe handling of refrigerants, including hazards and EPA regulations.

PRODUCT IDENTIFICATION

LIGHTING INSTRUCTIONS

PRODUCT DESIGN

UNIT INSTALLATION AND CLEARANCES

SYSTEM OPERATION

HEATING AND COOLING CYCLES

CONTROL BOARD FUNCTIONS

SERVICING

COOLING ANALYSIS CHART

Troubleshooting guide for cooling system issues based on symptoms and possible causes.

GAS HEATING ANALYSIS CHART

Troubleshooting guide for heating system issues based on symptoms and possible causes.

VOLTAGE AND WIRING TESTS

Procedures for checking voltage, wiring continuity, and transformer output.

THERMOSTAT AND ANTICIPATOR TESTS

COMPRESSOR AND MOTOR TESTING

Methods for testing compressor windings, motors, and related components.

REFRIGERANT SYSTEM SERVICING

Procedures for leak testing, evacuation, charging, and adjusting refrigerant flow.

BURNER AND GAS PRESSURE CHECKS

IGNITION AND CONTROL TESTING

Diagnosing ignition issues, testing pressure controls, and flame sensors.