EasyManua.ls Logo

Goodman ComfortNet DSXC160481BA User Manual

Goodman ComfortNet DSXC160481BA
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
RS6200007r14
December 2017
This manual is to be used by qualified, professionally trained HVAC technicians only. Goodman
does not assume any responsibility for property damage or personal injury due to improper
service procedures or services performed by an unqualified person.
Copyright © 2015-2017 Goodman Manufacturing Company, L.P.
ComfortNet
ASXC, DSXC, and GSXC Condensing Units,
ASZC, DSZC and GSZC
Split System Heat Pumps
with R-410A Refrigerant
Blowers, Coils, & Accessories
Service Instructions
is a registered trademark of Maytag Corporation or its related companies and is used under license to Goodman Company, L.P., Houston, TX. All rights reserved.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Goodman ComfortNet DSXC160481BA and is the answer not in the manual?

Goodman ComfortNet DSXC160481BA Specifications

General IconGeneral
Model NumberDSXC160481BA
CategoryHeat Pump
Cooling Capacity (BTU)48000
Cooling Capacity4 Ton
SEER Rating16
HSPF RatingUp to 9.5
Heating Capacity (BTU)48000
Voltage208/230
RefrigerantR-410A
Phase1

Summary

Product Design

Condensing Unit

Details the operation and components of the condensing unit.

Capacity Control - ComfortNet™ Models

Explains capacity modulation in ComfortNet systems via solenoids.

Communicating Unitary Control (UC) PCB

Information on the microprocessor-based control PCB for communicating HVAC systems.

System Operation

Cooling Cycle

Describes the step-by-step process of the system's cooling operation.

Heating Cycle

Describes the step-by-step process of the system's heating operation.

Defrost Cycle - ComfortNet™ Models

Explains how the defrost cycle is controlled and initiated in ComfortNet systems.

Troubleshooting Chart

Servicing

Checking Voltage

Procedures for measuring electrical voltage across key components.

Unitary Diagnostic Codes

Interpretation of diagnostic codes displayed by the control module for system faults.

Evacuation

Steps for properly evacuating the system to remove air and moisture for efficiency.

Accessories Wiring Diagrams

Heat Kit Wiring Diagrams

Wiring diagrams for 3-phase and 25kW heat kit installations.

Air Handler Wiring Diagrams

Wiring diagrams for AVPTC smart frame and MBVC air handler models.

Related product manuals