Need help?Do you have a question about the Goodman GMN SERIES and is the answer not in the manual?
General| AFUE | Up to 96% |
|---|---|
| Fuel Type | Natural Gas |
| Heat Exchanger | Stainless Steel |
| Blower Motor | Variable Speed |
| Cabinet Type | Upflow, Downflow, or Horizontal |
| Heating Capacity | 40, 000 - 120, 000 BTU/h |
| Stages | Single-Stage or Two-Stage |
| Motor Type | ECM |
| Warranty | 10-Year Parts |
Details required clearances from combustible materials for safe furnace installation.
Requirements and guidelines for providing adequate air for combustion and ventilation.
General guidelines, safety precautions, and materials for furnace venting.
Specific installation requirements and prohibitions for furnace venting.
Information on handling condensate drainage from the heat exchanger.
Detailed instructions and safety precautions for gas supply and piping installation.
Guidance on thermostat placement and connecting low voltage wiring.
Information on gas types, rating, and high altitude adjustments for furnace input.
Details on main limit, vent pressure, and flame roll-out safety controls.
Information on flame sensor function and blower door interlock switch.
Explanation of the integrated hot surface ignition and fan control module.
Instructions on maintaining and replacing circulating air filters.
Guidance on motor maintenance, lubrication, and cleaning.
Guidelines for performance and procedures for heat exchanger cleaning.
Essential safety warnings and step-by-step instructions for lighting the furnace.
Procedure for safely shutting off the gas supply to the appliance.
Detailed sequence of operations when the furnace is in heating mode.
Detailed sequence of operations when the furnace is in cooling mode.
Graphical overview of the furnace's heating cycle stages.
Graphical overview of the furnace's cooling cycle stages.
To Next Page
