To Next PageTo Next Page
Need help?Do you have a question about the Goodman GMS80805C A Series and is the answer not in the manual?
General| Brand | Goodman |
|---|---|
| Model | GMS80805C |
| Series | A Series |
| Category | Furnace |
| Type | Gas |
| Heating Capacity | 80, 000 BTU |
| Efficiency Rating | 80% AFUE |
| Input BTU | 80, 000 BTU |
| Output BTU | 64, 000 BTU |
| Blower Motor | Multi-speed |
| Fuel Type | Natural Gas |
| Installation Type | Upflow |
| Heat Exchanger Warranty | Limited Lifetime |
| Parts Warranty | 10 Years |
| Stages | Single Stage |
Identifies the GMS8 furnace series and its key features like AFUE and stage.
Directs users to service manuals and parts catalogs for further information.
Explains how model and manufacturing numbers are used for parts identification.
Highlights high voltage hazards, technician qualifications, and liability disclaimers.
Lists various GMS8 furnace model numbers, including gas type availability.
Covers EPA regulations and warnings against using uncertified devices or storing flammables.
Describes the electronic ignition, interlock switch, and diagnostic module of the GMS8 furnace.
Provides guidance on furnace placement, floor protection, and minimum service clearances.
Explains derating requirements and potential adjustments for installations above 4500 feet.
Emphasizes the mandatory use of Category I venting to prevent asphyxiation.
Identifies key components like heat exchanger, blower, gas valve, and control module.
Provides a table with dimensions (A and B) for various GMS8 furnace models.
Details trip points for pressure switches and settings for primary, rollout, and auxiliary limits.
Details trip points for pressure switches and settings for primary, rollout, and auxiliary limits.
Information on matching Amana coils with GMS8 furnaces, covering types, finishes, and refrigerants.
Details on nominal capacity ranges and furnace cabinet width compatibility for coils.
Advises on thermostat types and specifies filter requirements and types.
Provides tables for determining minimum filter area based on airflow and filter type.
Lists BTU input/output, AFUE, static pressure, temperature rise, and blower specs.
Covers power supply, ampacity, limit settings, gas pressure, and manifold pressure.
Lists BTU input/output, AFUE, static pressure, temperature rise, and blower specs.
Covers power supply, ampacity, limit settings, gas pressure, and manifold pressure.
Provides detailed charts of CFM and temperature rise versus external static pressure for GMS8***A* models.
Includes important notes on filter usage, speed adjustment, and altitude effects on performance.
Provides detailed charts of CFM and temperature rise versus external static pressure for GMS8***B* models.
Includes important notes on filter usage, speed adjustment, and altitude effects on performance.
A graphical tool to determine BTU output based on temperature rise.
Key formulas for calculating BTU output and temperature rise from CFM and RISE.
Illustrates the internal wiring connections for the GMS8 furnace.
Emphasizes high voltage safety, proper grounding, and replacement part requirements.
Provides a typical schematic of the integrated ignition control system for GMS8 furnaces.
Reinforces high voltage warnings and provides notes on schematic interpretation.
