PRODUCT IDENTIFICATION
2
The model and manufacturing number are used for positive identification of component parts used in manufacturing.
When engineering and manufacturing changes take place where interchangeability of components are affected, the
manufacturing number will change.
It is very important to use the model and manufacturing numbers at all times when requesting service or parts informa-
tion.
Description
Air Flow Direction
KBTUH
AFUE
G M S 95 070 3 B X A
Revision
Maximum CFM @ 0.5" ESP
3: 1200
4: 1600
5: 2000
Cabinet Width
M: Upflow/Horizontal
D: Dedicated Downflow
C: Downflow/Horizontal
H: Hi Air Flow
045: 45,000
070: 70,000
090: 90,000
115: 115,000
140: 140,000
8: 80%
9: 93%
95: 95%
G: Goodman
®
or Distinctions
S: Single-Stage/Multi-speed
V: Two-Stage/Variable-speed
T: Two-Stage/PSC
N: Natural Gas
X: Low NOx
NOx
A: Initial Release
B: 1
st
Revision
C: 2
nd
Revision
A: 14"
B: 17 1/2"
C: 21"
D: 24 1/2"
WARNING
WARNING
HIGH VOLTAGE!
DISCONNECT ALL POWER BEFORE SERVICING. MULTIPLE POWER
SOURCES MAY BE PRESENT. FAILURE TO DO SO MAY CAUSE PROPERTY
DAMAGE, PERSONAL INJURY OR DEATH.
ONLY INDIVIDUAL MEETING THE REQUIREMENTS OF AN "ENTRY LEVEL
TECHNICIAN" AS SPECIFIED BY THE AIR CONDITIONING AND REFRIG-
ERATION INSTITUTE (ARI) MAY USE THIS INFORMATION. ATTEMPTING
TO INSTALL OR REPAIR THIS UNIT WITHOUT SUCH BACKGROUND MAY
RESULT IN PRODUCT DAMAGE, PERSONAL INJURY, OR DEATH.
WARNING
WARNING
To Next Page
Loading...
