EasyManua.ls Logo

Goodman GPC 14 SEER R-410A User Manual

Goodman GPC 14 SEER R-410A
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
GPC 14 SEER R-410A
Package Air Conditioners
with R-410A
Copyright © 2009 Goodman Manufacturing Company, L.P.
RT6322007r2
August 2009
**Note that these tax credits are subject to specific requirements set forth in the American Recovery and
Reinvestment Act of 2009 and in the Internal Revenue Code. Goodman recommends that consumers consult
a tax professional if they have questions about the applicability of these credits.
This manual is to be used by qualified, professionally trained HVAC technicians only. Goodman does not
assume any responsibility for property damage or personal injury due to improper service procedures or
services performed by an unqualified person.
Refer to Service Manual RS6300011 (Horizontal)
for installation, operation, and troubleshooting information.
All safety information must be followed as provided in the Service Manual.
Refer to the appropriate Parts Catalog for part number information.
Models listed on page 3.
Models qualify for the 2009 and 2010 Federal Tax Credits for Energy Efficiency**
TECHNICAL MANUTECHNICAL MANU
TECHNICAL MANUTECHNICAL MANU
TECHNICAL MANU
ALAL
ALAL
AL
Question and Answer IconNeed help?

Do you have a question about the Goodman GPC 14 SEER R-410A and is the answer not in the manual?

Goodman GPC 14 SEER R-410A Specifications

General IconGeneral
BrandGoodman
ModelGPC 14 SEER R-410A
CategoryAir Conditioner
LanguageEnglish

Summary

Product Introduction

Safety Information Mandate

Emphasizes following all safety information provided in the Service Manual.

Product Identification Details

Model Numbering System Breakdown

Details the GPC 14 SEER R-410A model numbering system and its components.

High Voltage Safety Warning

Warns to disconnect all power before servicing or installing the unit.

Installer Responsibility Clause

States Goodman is not responsible for injury/damage from improper service procedures.

Qualified Technician Requirements

Specifies installation/repair must be done by qualified HVAC technicians.

Product Identification and Compliance

Non-Certified Device Warning

Warns against connecting non-certified devices to prevent damage or hazardous conditions.

Flammable Material Storage Warning

Warns against storing flammable materials or using gasoline near the appliance.

Installation Considerations

Rooftop Installation Service Platform

Details requirements for service platforms in rooftop installations per codes.

Rigging and Lifting Safety Precautions

Warns to keep the unit upright during rigging and moving operations.

HKR Electric Heat Kit Electrical Data

Heat Kit Circuit Requirements

Provides minimum circuit ampacity and maximum overcurrent protection for heat kits.

Electric Heater Wiring Safety

Warns about wire sizing for electric heaters and potential overheating/fire.

Package Cooling Specifications Overview

Cooling Capacity and Efficiency Ratings

Details cooling capacity (BTUH) and SEER/EER ratings for specific models.

Electrical System Specifications

Lists voltage, minimum circuit ampacity, and maximum overcurrent protection.

Critical Electrical Connection Guidelines

Emphasizes proper electrical connection and sizing per NEC and local codes.

Package Cooling Specifications (Larger Models)

Expanded Performance Data (GPC1424H41A*)

Expanded Performance Data (GPC1430H41A*)

Expanded Performance Data (GPC1430H41A* Continued)

Expanded Performance Data (GPC1436H41A*)

Expanded Performance Data (GPC1436H41A* Continued)

Expanded Performance Data (GPC1442H41A*)

Expanded Performance Data (GPC1442H41A* Continued)

Expanded Performance Data (GPC1448H41A*)

Expanded Performance Data (GPC1448H41A* Continued)

Expanded Performance Data (GPC1460H41A*)

Expanded Performance Data (GPC1460H41A* Continued)

Expanded Performance Data (GPC1460H41A* Final)

Performance Test Interpretation Guidelines

Interpreting Cooling Performance Data

Explains how variations in temperature, CFM, and pressures affect unit operation.

Operating Unit Performance Tolerances

Specifies typical operating tolerances for Delta T, HI PR, LO PR, and Amps.

Wiring Diagrams and Legends

GPC14[24-60]H41A* Unit Wiring Diagram

Provides the main wiring diagram for the GPC14[24-60]H41A* unit.

Related product manuals