Goodman GPH1324M41 User Manual

C
US
®
*NOTE: Please contact your distributor or our
website for the applicable Specification Sheets
referred to in this manual.
RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION.
ATTENTION INSTALLING PERSONNEL
Prior to installation, thoroughly familiarize yourself with this Installation Manual. Observe all safety warnings. During
installation or repair, caution is to be observed.
It is your responsibility to install the product safely and to educate the customer on its safe use.
These installation instructions cover the outdoor
installation of self contained package air conditioners
and heating units. See the Specification Sheets
applicable to your model for information regarding
accessories.
Goodman Manufacturing Company, L.P.
5151 San Felipe, Suite 500, Houston, TX 77056
www.goodmanmfg.com www.amana-hac.com
© 2010-2011 Goodman Manufacturing Company, L.P.
I NSTALLATION I NSTRUCTIONS
F OR S ELF -C ONTAINED P ACKAGE
A IR C ONDITIONERS AND H EAT P UMP U NITS
GPC/GPH 13 SEER “M” SERIES
W
ITH R-410A
IO-395B
9/2011
is a registered trademark of Maytag Corporation or its related companies and is used under
license to Goodman Company, L.P., Houston, TX. All rights reserved.

Goodman GPH1324M41 Specifications

General

SEER Rating	13
Refrigerant	R-410A
Voltage	208/230V
Phase	1
Compressor Type	Scroll
Sound Level	76 dB
Type	Heat Pump
Cooling Capacity	24, 000 BTU

Summary

Installation Instructions Overview

Attention Installing Personnel

Critical instructions and warnings for qualified installation personnel.

Safety, Codes, and Regulations

Safety Instructions

Warnings and symbols to ensure safe installation and operation.

Pre-Installation and Site Preparation

Pre-Installation Checks

Electrical Wiring

High and Low Voltage Wiring

Instructions for connecting power and control wiring.

Startup and System Checks

Startup Procedures

Step-by-step guide for initial unit startup and checks.

Final System Checks

Components and Heat Pump Operation

Heat Pump Operation

Operation, Testing, and Adjustments

Defrost Control

Field Testing and Airflow

Procedures for testing unit operation and adjusting airflow.

Performance Tuning and Adjustments

Speed Tap and Refrigerant Adjustments

Adjusting blower speed and refrigerant charge for optimal performance.

Maintenance and Service Issues

Maintenance and Service

Troubleshooting

Troubleshooting Chart

A comprehensive chart for diagnosing and resolving unit problems.