Goodman MBR Series User Manual

TECHNICAL INFORMATION MANUAL
MBR/MBE
Blowers
• Refer to Service Manual RS6100004 for installation, op-
eration, and troubleshooting information.
• All safety information must be followed as provided in the
Service Manual.
• Refer to the appropriate Parts Catalog for part number
information.
Models listed
on page 3
RT6223002 Rev. 4
July 2008
Copyright © 2004-2008 Goodman Manufacturing Company, L.P.
This manual is to be used by qualified, professionally trained HVAC technicians only. Goodman does not assume
any responsibility for property damage or personal injury due to improper service procedures or services
performed by an unqualified person.

Goodman MBR Series Specifications

General

Model	MBR Series
Housing Material	Galvanized Steel
Type	Blower
Motor Type	PSC (Permanent Split Capacitor)
Speed Settings	Multi-speed
Voltage	115V or 208/230V
Amperage	Varies by model
CFM Range	Varies by model
Wheel Diameter	Varies by model
Mounting	Horizontal

Summary

MBR/MBE Blowers Overview

Product Identification

Product Design

MBR/MBE Blower Specifications

Blower Opening Dimensions (Top View)

Details the physical dimensions of blower openings for different models.

HKR Heater Data

Lists compatibility of HKR heater kits with specific blower models.

Blower Performance Data

MBR Blower Performance Specifications

Presents airflow and static pressure data for MBR blowers.

MBE Blower Performance Specifications

Details airflow settings via dipswitch for MBE blowers.

Wiring Diagrams

Low Voltage Wiring Diagram for Cooling Unit (10KW and below)

Illustrates low voltage connections for cooling units with 10KW or less heat.

Low Voltage Wiring Diagram for Cooling Unit (15KW and above)

Illustrates low voltage connections for cooling units with 15KW or more heat.

System Composite Diagram MBR0800 (10kW & Below)

Shows overall wiring for MBR0800 units up to 10kW.

System Composite Diagram MBR1200-2000 (Above 10kW)

Shows overall wiring for MBR1200-2000 units above 10kW.

Single Stage Cooling with Single or Two-Stage Heating

Wiring for single-stage cooling with single/two-stage heating systems.

Cooling Only - 2 Stage Heat Thermostat

Wiring diagram for cooling-only units with a 2-stage heat thermostat.

Cooling Only - 2 Stage Heat (T'stat Enabled OT)

Wiring for cooling-only units with thermostat-enabled outdoor thermostat.

Heatpump - With 1 Stg Emht 1 Stg Aux Heat

Wiring for heat pump with 1-stage emergency and 1-stage auxiliary heat.

Heatpump - 2 Stg Emht 1 Stg Aux Heat

Wiring for heat pump with 2-stage emergency and 1-stage auxiliary heat.

Heatpump - 2 Stg Emht 2 Stg Aux - 1 Outdoor T-Stat

Wiring for heat pump with 2-stage auxiliary heat and 1 outdoor thermostat.

Heatpump - 2 Stg Emht 2 Stg Aux - 2 Outdoor T-Stats

Wiring for heat pump with 2-stage auxiliary heat and 2 outdoor thermostats.

Two-Stage Cooling with Conventional Two-Stage Thermostat

Wiring for two-stage cooling with a conventional two-stage thermostat.

2 Spd Cooling Only - With 1 Stage Electric Heat

Wiring configuration for 2-speed cooling with 1-stage electric heat.

2 Spd Cooling Only - 2 Stage Heat (1st T'stat 2nd OT)

Wiring for 2-speed cooling with 2-stage heat, 1st T'stat, 2nd OT.

2 Spd Cooling Only - 2 Stage Heat (T'stat Enabled OT)

Wiring for 2-speed cooling with 2-stage heat, T'stat enabled OT.

Heat Pump with Single or Two-Stage Heating (Options for Emergency Heat) with Conventional Two-Stage Thermostat

Wiring for heat pumps with single/two-stage heating and optional emergency heat.

Heatpump - With 1 Stg Emht 1 Stg Aux Heat

Wiring for heat pump with 1-stage emergency and 1-stage auxiliary heat.

Heatpump - 2 Stg Emht 2 Stg Aux - 1 Outdoor T-Stat

Wiring for heat pump with 2-stage aux heat and 1 outdoor thermostat.

Heatpump - 2 Stg Emht 2 Stg Aux - 2 Outdoor T-Stats

Wiring for heat pump with 2-stage aux heat and 2 outdoor thermostats.

HEATPUMP - 2 STG EMHT 1 STG AUX - 1 OUTDOOR T'STAT

Wiring for heat pump with 2-stage emht and 1-stage aux with 1 outdoor T'stat.

Two Speed Heat Pump with Single or Two-Stage Heating (Options for Emergency Heat) with Conventional Two-Stage Thermostat

Wiring for two-speed heat pumps with single/two-stage heating and optional emergency heat.

HEATPUMP - WITH 1 STG EMHT 1 STG AUX HEAT

Wiring for heat pump with 1-stage emergency and 1-stage auxiliary heat.

HEATPUMP - 2 STG EMHT 2 STG AUX - 1 OUTDOOR T'STAT

Wiring for heat pump with 2-stage aux heat and 1 outdoor thermostat.

HEATPUMP - 2 STG EMHT 2 STG AUX - 2 OUTDOOR T-STATS

Wiring for heat pump with 2-stage aux heat and 2 outdoor thermostats.

HEATPUMP - 2 STG EMHT 1 STG AUX - 1 OUTDOOR T'STAT

Wiring for heat pump with 2-stage emht and 1-stage aux with 1 outdoor T'stat.

ENCODED 2 SPD COOLING - WITH 1 OR 2 STG HEAT

Wiring for encoded 2-speed cooling with 1 or 2 stage heat.

Two-Stage Cooling with Conventional Two-Stage Thermostat (Encoded with add on 1N006 Diodes) (TSTWK01 Kit Required)

Wiring for two-stage cooling with a conventional thermostat and specific kit.

ENCODED 2 SPD COOLING - WITH 1 OR 2 STG HEAT 1 OT

Wiring for encoded 2-speed cooling with 1 or 2 stage heat and 1 outdoor thermostat.

ENCODED 2 SPD COOLING - WITH 1 OR 2 STG HEAT

Wiring for encoded 2-speed cooling with 1 or 2 stage heat.

Encoded Two-Stage Cooling with GMC Thermostat Part # CHET18-60 (TSTWK01 Kit Required)

Wiring for encoded two-stage cooling with a specific GMC thermostat kit.

ENCODED 2 SPD COOLING - WITH 1 OR 2 STG HEAT

Wiring for encoded 2-speed cooling with 1 or 2 stage heat.