Goodman MBE2000 User Manual

TECHNICAL INFORMATION MANUAL
MBR/MBE
Blowers
• Refer to Service Manual RS6100004 for installation, op-
eration, and troubleshooting information.
• All safety information must be followed as provided in the
Service Manual.
• Refer to the appropriate Parts Catalog for part number
information.
Models listed
on page 3
RT6223002 Rev. 4
July 2008
Copyright © 2004-2008 Goodman Manufacturing Company, L.P.
This manual is to be used by qualified, professionally trained HVAC technicians only. Goodman does not assume
any responsibility for property damage or personal injury due to improper service procedures or services
performed by an unqualified person.

Goodman MBE2000 Specifications

General

Brand	Goodman
Model	MBE2000
Category	Blower
Language	English

Summary

Product Identification and Model Breakdown

Model Number Structure

Explains the components and meaning of the blower model number.

MBR/MBE Blower Physical Specifications

Blower Performance Data

MBR Blower Performance Charts

Provides static pressure vs. airflow data for MBR models at various speeds.

MBE Blower Performance Settings

Details CFM settings via dipswitch for MBE models.

Wiring Diagrams: Low Voltage Connections

Cooling Unit Wiring with Heat Kit

Wiring Diagrams: Cooling Configurations

Cooling Only with Single/Two-Stage Heat

Wiring Diagrams: Heat Pump and Cooling Modes

Cooling Only with T'stat Enabled OT

Heat Pump with 1 Stage Auxiliary Heat

Wiring Diagrams: Heat Pump with 2 Stage Auxiliary Heat

Wiring Diagrams: Heat Pump with Multiple Thermostats

Heat Pump - 2 Stage Aux Heat with 1 Outdoor T'stat

Heat Pump - 2 Stage Aux Heat with 2 Outdoor T'stats

Wiring Diagrams: Two-Speed Cooling with Heat Options

2-Speed Cooling with Conventional Thermostat

2-Speed Cooling with Electric Heat

2-Speed Cooling with 2-Stage Heat Thermostat

Wiring Diagrams: Two-Speed Cooling with Thermostat/Outdoor Control

2-Speed Cooling with 2-Stage Heat (1 T'STAT, 2nd OT)

2-Speed Cooling with 2-Stage Heat (T'STAT Enabled OT)

Wiring Diagrams: Heat Pump Emergency Heat Scenarios

Wiring Diagrams: Heat Pump with Advanced Thermostat Control

Wiring Diagrams: Heat Pump with Specific Aux Heat Control

Wiring Diagrams: Two-Speed Heat Pump Configurations

Two-Speed Heat Pump with Single/Two-Stage Heating

Heat Pump - 1 Stage Emergency/Auxiliary Heat

Heat Pump - 2 Stage Emergency/Auxiliary Heat

Wiring Diagrams: Two-Speed Heat Pump with Dual Outdoor Thermostats

Heat Pump - 2 Stage EMHT/AUX Heat (1 Outdoor T'stat)

Heat Pump - 2 Stage EMHT/AUX Heat (2 Outdoor T'stats)

Wiring Diagrams: Heat Pump with Single Outdoor Thermostat Control

Heat Pump - 2 Stage EMHT, 1 Stage AUX (1 Outdoor T'stat)

Encoded Thermostat Wiring: Basic Configurations

Encoded 2-Speed Cooling with 1 or 2 Stage Heat

Wiring diagram for encoded 2-speed cooling with 1 or 2 stage heat.

2-Stage Cooling with Conventional Thermostat

Wiring for 2-stage cooling with conventional thermostat and kit.

Encoded Thermostat Wiring: With Outdoor Thermostat Control

Encoded 2-Speed Cooling with 1 or 2 Stage Heat (1 OT)

Wiring for encoded 2-speed cooling with 1 or 2 stage heat and 1 OT.

Encoded Thermostat Wiring: GMC Thermostat Integration

Encoded Two-Stage Cooling with GMC Thermostat

Wiring for encoded two-stage cooling with GMC thermostat and kit.

Encoded Thermostat Wiring: GMC Thermostat Variations

Encoded 2-Speed Cooling with GMC Thermostat

Wiring for encoded 2-speed cooling with GMC thermostat and 1/2 stage heat.

Troubleshooting Encoded Thermostats

Test Procedure and Signal Interpretation

Explains test spade connections, LED indicators, and signal outputs.