Goodman MBR User Manual

SS-GMBR www.goodmanmfg.com 11/15
Supersedes 9/15
* Complete warranty details available from your local dealer or at www.goodmanmfg.com. To receive the 10-Year Parts Limited Warranty, online
registraon must be completed within 60 days of installaon. Online registraon is not required in California or Quebec.
MBR
Multi-Position, Multi-Speed
Modular Blower
With PSC Motor
Contents
Air Handler Nomenclature .................... 2
Heater Kit Nomenclature ...................... 2
Product Specicaons ........................... 3
Dimensions ............................................ 4
Airow Data ........................................... 5
Heat Kit Data .......................................... 6
Wiring Diagram ...................................... 7
Product Features
• Direct drive, mul-speed PSC blower motor
• Cooling or heat pump applicaons:
upow, downow, and horizontal
• Blower secon usable as an electric furnace
• Control board includes a fan delay in the cooling
mode and is isolated from the air stream
• Intended for use with CAPF/
CHPF cased evaporator coils
• CAPF/CHPF coils are equipped
with a check owrater
• AHRI cered; ETL listed
• Painted, galvanized steel cabinet
• Horizontal or vercal conguraon capabilies
• 21" depth for easier ac access
• Foil-faced insulaon is glued in place and covers
the enre blower case to reduce operang
sound and cabinet condensaon
• Galvanized, leather grain-embossed nish
• 3 kW – 21 kW electric heat kits available
• Cabinet air leakage less than 2% at 1.0 inch H₂0 when
tested in accordance with ASHRE standard 193
• Cabinet air leakage less than 1.4% at 0.5 inch H₂0
when tested in accordance with ASHRE standard 193

Goodman MBR Specifications

General

Brand	Goodman
Model	MBR
Category	Blower
Language	English

Summary

MBR Modular Blower Overview

Model Nomenclature Guide

MBR Series Model Breakdown

Details MBR model nomenclature including series, airflow, electrical, and revisions.

HKR Series Model Breakdown

Explains HKR model nomenclature for unit type, phase, heating capacity, and revisions.

Product Specifications

Blower and Electrical Specifications

Lists blower dimensions, electrical data, and motor specs.

Model Specific Specifications

Details specifications for MBR0800AA-1 to MBR2000AA-1 models.

Unit Dimensions and Views

Side and Front View Dimensions

Illustrates overall unit dimensions from side and front perspectives.

Top View Knockout Locations

Shows top view with specific knockout placements and dimensions.

Airflow Performance Data

High Speed Airflow Performance

Details airflow in CFM at various static pressures for high speed.

Medium Speed Airflow Performance

Details airflow in CFM at various static pressures for medium speed.

Low Speed Airflow Performance

Details airflow in CFM at various static pressures for low speed.

Airflow Data Interpretation Notes

Explains notes for satisfactory operation and CFM adjustment factors.

Heat Kit Electrical Requirements

Heat Kit Circuit 1 and Circuit 2 Data

Lists heater amps, MCA, and MOP for different heat kits on circuits 1 and 2.

Single-Point Kit Electrical Data

Provides MCA and MOP for single-point kits.

Heat Kit Configuration Notes

Clarifies ampacity inclusions, revision levels, and specific kit types.

Air Handler Wiring Diagram

Wiring Diagram Component and Color Codes

Explains codes for components, wiring, and colors in diagrams.

Wiring Diagram Operational Notes

Provides critical notes on wiring connections, speed taps, and delays.

Three Speed Motor Wiring Details

Illustrates wiring configurations for three-speed motors.

Critical High Voltage Safety Warning

Emphasizes disconnecting power before servicing to prevent injury.

Five-Element Heater Kit Wiring

Heater Kit Component and Wiring Codes

Defines component codes and wiring conventions for heater kits.

Heater Kit Installation Notes

Provides instructions on speed tap selection and marking for installed kits.

Heater Kit High Voltage Safety Warning

Warns about high voltage hazards during heater kit installation and servicing.