REMOTE CONTROL
BATTERY INSTALLATION (Battery not Supplied )
INSERT BATTERIES INTO THE REMOTE CONTROL BATTERY COMPARTMENT FOLLOWING THE
POLARITY ( + - ) INDICATED. THE REMOTE CONTROL REQUIRE 2 X 1,5 “ AAA “ BATTERY FOR
OPERATION (WE RECOMMEND TO USE A GOOD BRAND ALKALINE BATTERIES )
1. POWER BUTTON
PRESS TO SWITCHING ON/STANDBY THE SYSTEM
2. DISC-CH
PRESS TO ROTATE THE DISC TRAY IN CLOCKWISE
3. MEMORY BUTTON
TO ACTIVE “MEMORY“ MODE FOR CD PROGRAMMING
4. PLAY
/PAUSE BUTTON
TO START PLAYING THE DISC AND INTERRUPT THE DISC PLAY AS
DESIRED
5. SKIP
SEARCH BACKWARD BUTTON
PRESS TO SKIP/SEARCH DOWN OF CD DURING PLAYBACK
6. SKIP
SEARCH FORWARD BUTTON
PRESS TO SKIP/SEARCH UP OF CD DURING PLAYBACK
7. STOP BUTTON
PRESS TO STOP THE PAYBACK OF CD OR CANCEL
THE MEMORY/RANDOM FUNCTION AT CD MODE
8. VOL +/- BUTTON
TO CONTROL THE VOLUME AT CD/VCD MODE
9. MUTE
PRESS TO ACTIVE MUTE FUNCTION
CONNECTING TO POWER
BEFORE SWITCHING ON MAKE SURE THAT THE VOLTAGE OF YOUR ELECTRICITY SUPPLY IS SAME AS
THAT INDICATED ON THE RATING LABEL
FOR YOUR OWN SAFETY READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO
CONNECT THIS UNIT TO THE MAINS.
MAINS (AC) OPERATION
THIS UNIT IS DESIGNED TO OPERATE ON AC240V 50Hz CURRENT ONLY. CONNECTING IT TO OTHER
POWER SOURCES MAY DAMAGE THE UNIT.
CAUTION
TO PREVENT ELECTRIC SHOCK DISCONNECT FROM THE MAINS BEFOREREMOVING COVER. NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
SAFETY PRECAUTION
DO NOT ALLOW THIS UNIT TO BE EXPOSED TO RAIN OR MOISTURE.
MAINS SUPPLY: 240V 50Hz – AC ONLY
THIS SYMBOL MEANS THAT THIS UNIT IS DOUBLE INSULATED. AN EARTH CONNECTION IS NOT
REQUIRED.
3 English
To Next Page
Loading...
