1. Your Portable Bluetooth Speaker has a built in rechargeable battery.
Before using it for the first time please fully charge the battery.
2. Insert the charging cable into the micro USB port on the unit.
3. Connect the USB plug into a PC or AC/DC adaptor(not included).
When the LED indicator is Red, the speaker is charging. Charging
will take approximately 3 hours.
4. When the battery is fully charged, the LED indicator light will turn off.
Please remove the charging cable once your speaker is fully charged.
5. If no audio signal is detected for 30 minutes, it will automatically
enter standby mode.
3.1 Charging Your Portable Bluetooth Speaker
Note: When charging your speaker for the first time, please charge
for 12 hours. Please make sure to charge your battery regularly, If
the battery is not charged or used for a long time, it could cause
damage to the battery.
Quick Setup3
To Next Page
Loading...
