Goodmans GDR10 - Connecting the Receiver; Connecting to TV

12
A
DR10 Di
g
ital TV Receiver
12
GDR10 Di
g
ital TV receiver
How to connect the receiver to your T
1 Put your receiver on a firm,
V
level surface with at least a
ure it is close to
TV is plugged into or pull the TV’s
panel of the receiver.
ect your receiver to your TV.
(See pages 13, 14 and 15.)
5 Once you have connected the receiver, plug the receiver’s
power lead into the mains.
6 Plug the TV back into the mains socket.
10-centimetre gap around all the sides. Make s
the TV you are going to connect it to.
2 Turn off the plug socket your
plug out of the socket.
3 Take the aerial lead out of the TV and connect it to the ‘RF IN’
socket on the back
4 There are three ways to conn