3
01Setting Up
1. Unbox your Mini Stereo System and check that you have all the necessary
components.
2. Place the Mini Stereo System Base Unit on a sturdy level surface or stand. If it
is placed on a shelf, the shelf must be capable of holding at least 12 kg.
3. Place the speakers on the same surface and connect the speaker cables to the
back of the Mini Stereo System Base Unit.
4. Connect the aerial to the aerial socket and extend the aerial away from the Mini
Stereo System Base Unit. Note that the end of the aerial has a hole which can
be used with a drawing pin to pin the aerial to a board or wall if required.
5. Connect the power cable to the mains power.
6. Insert two AAA batteries into the remote control.
You can now begin enjoying your new Mini Stereo System.
To Next Page
Loading...
